Conventions To see translations of the warnings that appear in this publication, refer to Appendix A in this manual. If you don’t select any criteria “all” CVE entries will be returned Vulnerabilities with exploits. Each device in the radio network must be configured with the same SSID to provide roaming capability. Central Unit In An All-wireless Network The Access Point serves as the focal point for communications, increasing the communication range of wireless users. Troubleshooting This chapter provides troubleshooting procedures for basic problems with the Access Point.

Uploader: Samum
Date Added: 13 January 2016
File Size: 9.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 37626
Price: Free* [*Free Regsitration Required]

Cisco Aironet 340 Series Hardware Installation Manual

The Access Point does not need to use Key 3 as its transmit key, however. Clicking the Gateway link takes you to the Routing Setup page, which you use to configure the Access Point to communicate with the IP network routing system. WebViewer are trademarks of Cisco Systems, Inc.

Troubleshooting This chapter provides troubleshooting procedures for basic problems with the Access Point. How does it work? Conventions To see translations of the warnings that appear in this publication, refer to Appendix A in this manual.

Troubleshooting Troubleshooting This chapter provides troubleshooting procedures for basic problems with the Access Point. The series Access Point receives power through the Ethernet cable. The radio indicator blinks green to indicate radio traffic activity.

  CANON M390 DRIVER

Product Details

There are NO warranties, implied or otherwise, with regard to this information or its use. In large installations, wireless users within radio range of an Access Point can roam throughout a facility while maintaining uninterrupted access to the network.

Increase separation between the equipment and receiver. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: Installation This chapter describes the setup of the Access Point and includes the following sections: For the series, the following standards were applied: Also See for Aironet Series Configuration manual – pages Hardware installation manual – 70 pages Quick start manual – 16 pages.

If your boot block version is 1. Step 2 Choose a power option for the Access Point. Multiple Overlapping Networks Coverage Option SSIDs and different channels, which may depending on configurations prevent clients from roaming to Access Points of a different wireless network.

CISCO SERIES 11MB DS ACCESS POINT | AIR-APE2C | CISCO

Indicator Lights The radio indicator blinks green to indicate radio traffic activity. Using the power injector with other Ethernet-ready devices can damage the equipment. Aironwt Feedback in the toolbar and select Documentation. For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at http: Point to be compatible with other devices on your wireless LAN: Metal or steel construction is a barrier to radio signals.

  DOCUPRINT N2825 DRIVER

Press pr and then press Enter to select Config Server Protocol. Got it, continue to print. Page 2 You can determine 430 your equipment is causing interference by turning it off. Press Enter after you make your selection.

Central Unit In An All-wireless Network The Access Point serves as the focal point for communications, increasing the communication range of wireless users. Select this setting if your network contains Cisco Aironet devices that operate at 2 Mbps. Page cisc Access Point Power options include: This chapter includes the following sections: The Part 15 radio device operates on a non-interference basis with Caution other devices operating at this frequency.

Page 77 For the series, the following standards were applied: