I would certainly keep the old tube as a spare. Back 7 years ago I asked the same question before buying my 30 watt Mercury. We did things that way and currently I have 6 x 30w lasers running and we put out a LOT more stuff than lets say , 3 x 60 watters would. Adding water cooling would not be nice. My rep Jorlink in NC worked with me to locate the problem, even overnighting a main board to me, however I solved the problem myself tracing it to some faulty cabling from the autofocus probe. Is it only one program which has the problems or is it any program?

Uploader: Gogami
Date Added: 16 September 2013
File Size: 63.42 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 95262
Price: Free* [*Free Regsitration Required]

A At the end of a job, the laser does not shut off as it returns to the home position, scoring the material, B At end of job, head does not return to home position, C System does not always esplorer into standby mode. If not they will still give you the info. You would probably have to move some minor parts from the old oi to new, and may have to do some minor harness change.

In my case the resplacement of firmware on the laser and a il driver DV 3. Laserpro Explorer II 30 watt laser upgrade? I assume you have the Laserpro already? When I first got my laserpro a year ago, I had similar problems.

LaserPro Explorer II problems Here is my story… My company is very small one man shop really … and we decided to get a laser for our prototyping, and to increase our product line into laserprl areas.

  D68 VISTA DRIVER

Do I purchase this upgrade directly from LaserPro? My rep Jorlink in NC worked with me to locate the problem, even overnighting a main board to me, however I solved the problem myself tracing it to some faulty cabling from the autofocus probe.

Since the problem was fixed with a newer version of firmware, tech support MUST have been aware of the problem in order for it to have been fixed.

GCC Laser Pro Explorer II

Try looking in the wire frame mode if you use Corel draw. Other than that, I have worked the hell out of this machine cutting wood and acrylic, and engraving wood, acrylic and painted brass and aluminum. All times are GMT Photoshop works pretty well. We did things that way and currently I have 6 x 30w lasers running and we put out a LOT more stuff xeplorer lets say3 x 60 watters would.

After I deleted it no more problems. Find out before upgrading if the installed power supply will cope with a more powerful laseralso determine if the motherboard will support that brand of tubeExplorers came with synrads and Deos sourcesyou might have to upgrade within the family of tubes it came out with.

Sponsored Forums Private Forums Authors. Has anyone upgraded their laser before?

I would certainly keep the old tube as a spare. CLTT setup mm hot and cold laminator3x Dopag resin dispenserssandblasting setup, acid etcher. Thank for the responce… I use corel lassrpro. I have already eliminated any cabling, computer, and software issues.

LaserPro Explorer 2 E Laser Engraver | eBay

If you have a Synrad tube I’d say you will probably have to stay with Synrad for the upgrade or you may find mechanical complications. Then they had me go to great links to to report the problem only to discover myself that the drivers were out of date with the lates on the laserprousa. I have read in many areas on Laserpro’s website that their lasers are easily upgradable but can’t find any more information on doing this.

  IOMEGA EGO RPHD-UG3 DRIVER DOWNLOAD

My Laser Pro rep has come by several times, to change out the firmware, and try other fixes, and says that the next step is to replace the main board. Mine also would fail to shut off on the return but I traced it down to a hidden line in the drawing. Coreldraw seems to be the program they test the machine with because I seen to not have problems with corel.

In that year, I have only had two issues. Are you using usb or parallel port?

Laserpro Explorer II 30 watt laser upgrade?

The time now is My company is very small one man shop really … and we lasfrpro to get a laser for our prototyping, and to increase our product line into new areas. If your file is not proprietary, maybe you can send it to somebody with the same machine to test.

We have had it now for about 8 weeks now, and have been having a number of intermittent issues with it.